Should You Leave Hot Water on While Away on Holiday

Whether or not you leave your hot water on while you are on vacation will be determined by a number of factors. These include the age and location of your water heater, its hosing or piping, and the amount of time you will be away on holiday. 

How Old is Your Hot Water Heater?

If your hot water heater is approximately (or older than) 10 years old, you may want to turn off your hot water heater when you leave on holiday. Older heaters have a greater risk of leaking or rupturing and may cause damage to your home while you are away. 

You should note that it could be difficult to turn on an older heater after a holiday as well. If you plan to be gone for a day or two, it may not be worth it, especially since you may have to wait for you post-travel showers. 

Where is Your Hot Water Heater Located?

If your hot water heater is indoors, you may want to turn it off while you are away. Even if your hot water heater isn’t aged, if it were to leak or rupture while you were away, it could cause flooding in your home. Unchecked for a period of time could cause costly repairs. 

Braided Hoses or Copper Pipework?

If your hot water heater is connected with braided hoses, turn it off when you leave for your holiday. Braided hoses are created out of rubber and can rupture under pressure. If you have copper pipework, there is a smaller chance that your heater will cause damage. 

How Long Do You Plan to Be Gone?

If you are gone for a weekend or a few days, there may be little difference on whether or not you turn off your heater. It is unlikely that you will see much of a change on your bill either way.

If your holiday will last for a few weeks (over a month), you may save a fair amount on your utility bills while you are away if you turn it off. Ensuring that your water heater is off will also prevent water damage if something were to happen to your hot water heater.

Use “Holiday Mode”

Instead of turning your hot water heater off completely, you could also reduce the heat to between 10-20°C while you are away. You won’t have to worry about restarting the heater when you return, you may still save a few pennies per day on your utilities, and it is less likely that your hot water heater will explode.

Can a Hot Water Heater Explode?

A hot water heater can explode if the pressure relief valve of the hot water heater malfunctions or the temperature is set too high. The best way to prevent your hot water heater from exploding is by making sure you keep it at the manufacturer’s recommended temperature or lower. 

As the hot water heats and turns to gas, the heater needs to release its pressure through the relief valve. If the valve malfunctions, the pressure will build until it ultimately explodes. When it explodes, it is likely to shoot through your roof, causing damage to your home. Exploded tanks have often been found several blocks away from its origin. 

Is it Cheaper to Leave Your Hot Water System on All the Time?

It is generally cheaper to turn off your hot water system when you don’t need it and only turn it back on 30-45 minutes before you take a hot bath or shower. Allowing your hot water system to continually run requires it to use the boiler periodically to keep it a specific heat. 

Some systems have a central heating programmer to give you a little hot water in between periods where you need a lot. 

The Dangers of Installing a Hot Water System Yourself

 

There are many things that can go wrong if you try to install a hot water system by yourself. If you fail to set it up correctly, it could fail and cause a lot of damage to the rest of your home, resulting in costly repairs. This post will cover a few reasons why you should consult a professional.

Buying the Wrong Sized System

When purchasing a hot water heater, it is important that you buy the right size. If you purchase one that is too small for you or your family, you will continually run out of hot water, which will cause it to continually run. This can lead to your hot water heater failing or increased utility bills. 

While the size of the hot water heater you’ll need will depend on the amount of hot water you use as a family, the typical heater size for a family of 3-4 people is between 182-284 litres for an electric model. For a gas model, you would look at a hot water heater that held 151 litres for a family who uses a small amount of water and 189-227 litres for a family uses more. 

If you aren’t sure about the size of hot water heater you need, reach out to 1st Choice Hot Water. Their 40+ years worth of experience gives them the knowledge they need to assist you in finding the right product for your home. 

Installing a Water Heater Requires a Plumbing Permit

In Australia, it is required that a hot water heater is installed by a professional plumber. While it is classified as notifiable work and doesn’t need a specialised permit, the plumber will need to register a notifiable work form to the QBCC.

This includes replacing, removing, or installing a hot water heater in an existing building or in an extension or a structure for an existing class 1 building. 

Without proper care and a full understanding of how hot water systems work, several mistakes could potentially be made that could cause damage to the system or to your home.

Location Issues

Some hot water heaters are located in a difficult access location, including under floors, attics, and smaller rooms. While there are guidelines in place on the openings and service space for the unit, replacing an older model with a new heater can occasionally be very tricky, even for a professional. 

The average weight of a hot water heater is anywhere between 55-70 kilograms, making it unsafe to move it into a place alone, especially if it is located in an unusual spot, such as an attic. 

The Risk of Dry Firing Your Water Heater

The heating elements of your hot water heater were created to operate in water. If there is no water or an inadequate amount of water in the dank when the power is turned on, the heating elements could be dry-fired. If a copper element is dry-fired, it means the temperature on it has been raised to the point of destruction. 

When the copper element is in water, it won’t get much hotter than 1°C above the temperature of the water. However, if the power is turned on while the tank is dry, the elements can heat up to between 1035-1100°C.

Once a copper element has been dry fired, it could fail immediately (within seconds) or fail after a few more months of use. 

How to Tell if Your Elements Have Been Dry-Fired

You may be able to tell if the elements on your hot water heater have been dry fired in one of the following three ways:

  • The element’s tubing will have become soft (annealed) to the point where it can easily be bent, even in their straight sections. 
  • Exposed copper due to zinc plating being burned or melted off. 
  • (On Sandhog Elements)  Signs of melting next to the screw plug on the element box.

Conclusion

There are several things that could potentially go wrong if you are installing or replacing a hot water heater alone. To ensure that it is installed safely and correctly, you should reach out to a professional. 

1st Choice Hot Water not only offers the most competitive pricing for hot water systems but with decades of industry experience, they can ensure that you find the right heater for your family and will install your unit in a safe and timely manner. Contact us for a quote today. 

How Do You Tell If Your Hot Water System is Going Out

As your hot water unit begins to age, you could begin to notice a few symptoms that indicate that it will need to be replaced. The good news is that a newer model will, most likely, be more energy efficient than your old system, which will save you in utility costs. Most hot water systems will last about a decade, and you can find out when it was manufactured from the tag on the manufacturer sticker on the heater. 

Here are a few common signs of a failing hot water system:

Strange Noises

Typical noises from a failing hot water system include popping, banging, or an echo. These sounds generally indicate that sediment has built up within the system. Your tank will take longer to heat the water, which will increase your utility bills.

Water Around the System

If water is leaking from your tank (and not the connections), replace your system as soon as possible. Since metal expands when it is heated, the leak is likely to increase if not dealt with properly.

Brown/Rust-Coloured Water

If your cold water is clear, but your hot water is a rust-colour, it is due to either your system or your hot water pipes. To determine which is failing, run your hot water for a while. If the liquid clears, it is most likely your pipes. If not, it is a good sign that your system is failing and should be replaced soon. The cause of the brown water is due to corrosion. If ignored, you could end up with a damaging leak.

Are Hot Water Systems Covered by Insurance?

There are two situations in which insurance may cover the price (or part of the price) of a new hot water heater. If it is covered, it is typically located on your Home and Contents Insurance policy. The first is in the event the hot water system is damaged, the second is for an environmental upgrade.

Insurance Replacement Due to System Damage

If your hot water system suddenly bursts or begins to leak or discharge liquid, your Home and Contents insurance may help cover the price of a new system. Check your policy or call your insurance adjuster for clarification. Keep any receipts or technician notes handy in case you need to file a claim.

Insurance Upgrade for Environmental Purposes

As Australian residents continue to be more environmentally-conscious, some insurance companies are happy to help cover the price of an upgraded hot water system. If your insurance does cover upgrades, it is typically to a solar system. Call your insurance provider and ask them what your policy covers. 

You might also qualify for a government grant to help you cover the cost of a solar hot water system.

How Much Does it Cost to Replace a Hot Water System?

The cost it would take to replace your hot water system would depend on the type and size of the system. Here are the things that would influence the replacement cost:

  • The system itself
  • Additional plumbing materials if you have chosen to relocate where your system will sit
  • Labour costs

1st Choice Hot Water has been serving the Brisbane area for over 40 years and has since expanded to be Australia’s #1 online hot water system, specialist. We are committed to quality and good customer service. We strive to exceed your expectations every time you deal with us. If you are experiencing issues with your hot water system, contact us today for guidance on your next step.

Heat Pump Hot Water System for Free

Heat Pump Hot Water System for Free

As is the case very year, 1st Choice Hot Water rewards one lucky customer with a free hot water system.  Tami from Queensland wins the largest value prize ever given away. Tami had a Rheem 325 Litre heat pump hot water system installed because it is a great way  to save money on hot water running costs. Now Tami is saving even more money with a free hot water system valued at over $3000.

1st Choice Hot Water Winner
Tami wins Rheem heat Pump Hot Water from 1st Choice Hot Water

The Rheem integrated heat pump as with most heat pumps , substantially saves hot water running costs. A heat pump uses as little as 30% of the energy required to run a conventional electric storage system. Tami’s decision to install a 325 Litre heat pump hot water system, is perfect for her home of five. Tami is a very busy, hard working mum. The last thing she wants to think about is hot water. With a mineworker husband and 3 children on the go, reliable inexpensive hot water is very important. The Rheem heat pump is perfect.

Tami
1st Choice Hot Water Heat Pump Winner

Tami first came to us because her hot water power bill needed to be reduced. After having a Rheem electric storage unit for many years, it was an easy decision to stay with the Rheem range of water heaters.

The heat pump hot water system is an easy choice because of the many advantages.

 

The Rheem heater installed on the 18 hour off peak tariff  (Tarrif 33) is a further saving to the running costs as recommended by the manufacturer.

WARRANTY:

Further peace of mind is that it carries a Rheem 5 year warranty.

The smile on Tami’s face says it all.  Reliable and inexpensive hot water and now a free heat pump hot water system.

Customers can purchase this product and many other quality hot water systems on our web site.

 

 

 

 

Are you paying too much for your Hot Water?

Are you paying too much for your Hot Water?

Hot water can be very expensive if not installed correctly. Something that I notice a lot when I go to a domestic residence that has just had the electric water heater replaced, is that the customer is paying too much to heat the system. There are several ways that you can make small changes to save a lot of money.

If you do your homework and get some informed advice before you purchase or replace your new hot water system, the energy saving can be quite significant. Considering that your hot water unit is one of the big energy users in your household, taking the time to choose the best hot water system for you makes a lot of sense.

Lets talk about a situation with a standard house hold accommodating 2 adults and a couple of children.

Scenario 1.

If you have no PV Panels on the roof, you should consider purchasing a larger unit such as a 315 Litre system and connect it to a night rate tariff. Although the initial cost of a larger system is more, you will more than recovery that cost in the electricity savings over the life of the unit. If you have PV (Photo Voltaic) panels and are on a high feed in tariff, you should also consider this arrangement.

Scenario 2.

If you have PV panels and are only receiving a small feed in tariff, consider this option. Purchase a system with at least 250 Litre  capacity with a low wattage element such as 1.8 or 2.4kw. As you optimally need to run your hot water system during the hours that the PV panels are producing power, consider fitting a time clock to the circuit. By using a low wattage element, you minimise the risk of the hot water system using more power than the PV panels can produce.This system works very well when the house is generally unoccupied during the day, such as kids at school and the parents at work. There is no point in feeding electricity into the grid at a low rate when you can be heating your hot water for free.

Note: If your household showers morning and night, you may need to consider a larger capacity electric water heater.

 

 

 

 

 

Rheem Hot Water 12 Year Warranty

Rheem Hot Water 12 Year Warranty

Rheem hot water extending their hot water cylinder from 10 years to a 12 Year Warranty has  moved the standard of hot water service to unprecedented new levels. In January 2018 the Rheem family are extending the warranty of many of their popular range of hot water products. This will give customers the confidence in Rheem delivering hot water, steady hot and strong. Another example of why Rheem is Austria’s favourite hot water.

The Rheem 491 range of vitreous enamel cylinders including 250, 315 and 400 Litre systems, as well as the full 4A1 range of Stainless Steel models will now offer a 12 year cylinder warranty.

 

Only Rheem features the 12 Year REAL difference

  1. Rheem VE Electric warranty
    12 Years on Cylinder,
    1 Year Parts & Labour warranty on all components.
  2. Rheem Stellar SS Electric warranty
    12 Years on Cylinder, 3 Years Labour on Cylinder
    1 Year Parts & Labour warranty on all other components.

For Domestic (non-Commercial) installations. Conditions apply. See the Warranty set out in the Owner’s Guide & Installation Instructions or view at www.rheem.com.au/warranty

Offer Extends to Vulcan, Aquamax and Everhot

Complimenting this game changing offer, Rheem hot water will also extend the warranty of the Vulcan, Aquamax and Everhot (250-400 Litre Models) range of products. Warranties on these water heaters will be extended from 7 to 10 year warranties at the same time. Product improvements have been made to back this longer warranty.

 

 

 

 

 

 

Warranty extension to apply to a wider range

Progressively, Rheem will extend warranties on an extended range of products. Products such as the gas storage range and the small electric storage rang of products. With Rheem introducing a new range of continuous flow units, both on the Metro range and the Pronto range, as well as the proven range of stainless steel water heaters. This places them well in front as the industry leader in Australian water heater manufacturers.

The full range of the Rheem family of hot water heaters is available on our website.

Keep in touch with further developments in the warranty revolution by signing to our newsletter

Beat the heat this summer: Our 5 tips for choosing the perfect air conditioner for your home.

As we countdown to Christmas, the mercury is starting to rise in preparation for some serious heat these holidays. To keep your guests (and yourself!) cool and comfortable whatever the temperature, you can’t go past the latest air conditioner technologies.

But how do you know which air conditioner you need? Here’s our 5 top tips for picking the air conditioning solution that suits your room best.

 

best air conditioner
How to choose the right air conditioner for your home

  1. Calculate your wattage per square metre. Air conditioners generally need at least 120 watts per square metre to cool or warm at maximum efficiency. That means you’ll need to find a model that has the right capacity for the space it’s in. If you choose something that doesn’t quite meet your requisite capacity, your investment could end up causing you more money in energy bills or go up in smoke because you’ve put to much strain on it.
  2. Do you need to split? Split systems are the most effective home air conditioners types. They’re quieter, more powerful and more energy efficient – good news if you want to cool a really large room or your entire home. Many have extra features like WiFi, air ionisers and motion sensors to increase air quality and efficiency even further. Some will even sense whether there’s a human in the room and direct the air flow towards them.
  3. The Eco Solution. An inverter air conditioner is often kinder to the environment because you can set the temperature you want and a sensor varies the compressor speed to match. By contrast, conventional air conditioners are always working flat out 100% of the time. Inverters therefore deliver more consistent airflow, improved temperature regulation and increased energy efficiency.
  4. Open a window. If you’re after a more affordable solution and don’t mind losing part of your windows or wall in the name of feeling comfortable, window or wall air conditioners might be a worthy alternative to split systems air conditioners. You might want to custom make an insect guard if you opt for a window model though, because you’ll need to keep your window open at all times.
  5. Take it with you. If you’d prefer not to install something permanent or you’re living in rented accommodation, a portable air conditioner is your best bet. They’re not as effective but they cost a good deal less and they’ll keep you relatively cool in a pinch. They’re also great for moving from room to room so you stay comfortable wherever you are in your house.

Contemplating a new air conditioner this summer season?

We’ve got some great deals on the latest air conditioners – click here to take a look.