Description
Stiebel Eltron SNU 10 10Litre Heater
The Stiebel Eltron SNU 10 10Litre Heater hot water system incorporates a highly efficient insulation design which provides thermal insulation and minimal energy losses. The thermal cut-out provides a permanently safe maximum water temperature. In addition, the SNU has a Thermo-Stop function that helps to save energy and prevents the mixer tap from being heated in stand-by mode. These features, coupled with a range of tapware specifically designed to complement the brilliant SNU point of use heaters, ensure that we have the ideal solution for your kitchen, tea preparation area, kitchenette or BBQ area.
The SNU 5 incorporates a Drip-Stop design that eliminates dripping from the tap during heat up due to its specialised construction that helps save water.
- SNU is made in Germany
- Designed for single isolated sink
- Save energy and water
- Low minimum standby power consumption
- To be fitted with specialised open vented tapware
| Model number | SNU 5 | SNU 10 |
| Rated output (240V) | 2kW | 2kW |
| Rated current (240V) | 10Amp | 10Amp |
| Phases | 1/N/PE | 1/N/PE |
| Electrical Installation | As per AS/NZS3000 | |
| Installation requirements | AS/NZS3500.4.2 & local requirements | |
| Type of installation | Under sink | Under sink |
| Permissible operating pressure | 500kPa | 500kPa |
| Temperature adjustment | Up to 85°C | Up to 85°C |
| Tank capacity | 5 Litres | 10 Litres |
| Mixed water volume at 40°C from single draw off | 10 Litres | 19 Litres |
| Standby energy consumption / 24 hours at 65°C | 0.2kWh | 0.32kWh |
| IP Rating | IP24 | IP24 |
| Height | 421mm | 503mm |
| Width | 263mm | 295mm |
| Depth | 230mm | 275mm |
| Weight (filled with water) | 8.1kg | 15kg |
| Colour | White | White |
| Approvals | WaterMark Lic No. WMKA00301, AS3498 | |
| For one draw off point | Yes | Yes |
| ECO setting | 60°C | 60°C |
| Please note: The SNU under sink single point of use water heater is open vented and must be installed with a Stiebel Eltron open vented sink mixer. | ||
- Made in Germany
- Designed for single isolated sink
- WaterMark approved. Lic No. WMKA00301, AS3498
- Available in 5 litre (SNU 5) or 10 litre (SNU 10) tank capacity
- Low minimum standby power consumption
- Compact space saving design
- Installed underneath the sink for single point of use
- 240V – three-pin power cord with earthed plug 10Amp
- Open vented design must be fitted with specialised tapware
- No safe tray required
- No ventilation required
- 5 year full parts and labour domestic water heater warranty*
PLEASE NOTE: THE SNU WATER HEATER IS OPEN VENTED AND MUST BE INSTALLED WITH A STIEBEL ELTRON OPEN VENTED TAP (MES, MEW, MESG OR MESA TAP). TEMPERING VALVES, WATER FILTERS ON THE TAP OR NON APPROVED AERATORS CANNOT BE FITTED TO THIS HOT WATER SYSTEM.
*Conditions apply – refer warranty policy for full details.
No, the SNU water heaters are open vented and require a specialised open vented sink mixer.
Yes,as hot water heats up and expands it will drip from the tap. This only occurs while heating on the 10 litre unit. The SNU 5 on the other hand incorporates a Drip-Stop function so the open vented taps fitted to the SNU 5 will not drip when heating.
Yes, the SNU 5 incorporates a “Anti-Drip” feature. The open vented tap will not drip while heating. This feature is not available for the 10 litre unit.
No, the SNU water heater is designed as a single point of use water heater and can only be operated with one open vented sink mixer.
On top of the water heater between the inlet and outlet the sticker will advise the size SNU 5 or SNU 10. Within the downloads section of the SNU you can download a pdf showing you exactly where and how to locate this sticker.
No, the SNU is designed to provide hot and cold water to a sink. These units are not a boiling or chilled system.
The SNU recovers at approximately 1 litre a minute.
This will be dependant on the sink size, however we recommend the SNU 10 if a larger volume of hot water is required.
