Quick Installation Kit AVG QIK-U

$90.00

The QIK20-U HWO fitting is supplied with theĀ option of either 15mm or 20mm compression inlet connections.
No more arriving on site with the wrong fitting.
The on site assembly diagram says it all.

Category:
Brochure

Description

Quick Installation Kit AVG QIK-U Universal

QUICK CONTINUOUS FLOW UNIVERSAL KIT

The Quick Continuous Flow Kit (Quickie-U)Ā AVG QIK-U is a universal kit which includes a loose nut to male ball valve with optional inlet and outlet end connection adaptor options.

The Quickie-U Kit has been developed to allow the installing plumber to decide what kit configuration is required at the point of installation.

One of the major advantages to this approach is that the plumbing merchant only needs to carry one kit on the shelf and the installing plumber one kit in their vehicle.

This not only saves cash, but valuable shelf space and peace of mind.

Currently the only options available to the plumbing merchant and the plumber are a range of purpose built ball valves and outlet fittings with fixed inlet and outlet connections. This means that they both have to carry extra products on the shelf and in their vehicles to cater for differing continuous ow water heater inlet and outlet configurations and installation requirements.

DESCRIPTION

The Quick Continuous Flow Kit includes everything required to install a variety of different continuous ow hot water heaters, two loose nut ball valves, one water and one gas and a hot water outlet fitting.

Also included in the kit is a range of optional inlet and outlet connection adaptors for the water and gas ball valves and the outlet fitting, this allows the installing plumber to make their selection and fit the appropriate adaptors as required on site.

FLARED ADAPTOR OPTIONS

First fit the nut and slide it onto the 3/4ā€ copper tube and are the tube. Fit the 3/4ā€ ared adaptor into the male connection of the ball valve then connect the tube and tighten the nut to achieve a 3/4ā€ flared connection.

To achieve a 1/2ā€ flared connection just select the 1/2ā€ flared tube support adaptor and fit it into the nut. Then slide the nut onto the 1/2ā€ copper tube and are the tube. Fit the 1/2ā€ ared adaptor into the male connection of the ball valve then connect the tube and tighten the nut.

COMPRESSION ADAPTOR OPTIONS

By fitting the 3/4ā€ tube stop adaptor into the male connection of the ball valve or the hot water outlet fitting and then fit the nut and the 3/4ā€ copper olive onto the copper tube a 3/4ā€ compression plumbing connection can be achieved. Just connect the tube and tighten the nut.

To achieve a 1/2ā€ compression plumbing connection just select the 1/2ā€ tube stop adaptor and fit it into the male connection of the ball valve or the hot water outlet tting. Then fit the the 1/2ā€ tube support adaptor into the nut and slide the nut and the 1/2ā€ copper olive onto the copper tube. Just connect the tube and tighten the nut.

COMPRESSION ADAPTOR OPTIONS

By fitting the 3/4ā€ tube stop adaptor into the male connection of the ball valve or the hot water outlet tting and then fit the nut and the 3/4ā€ copper olive onto the copper tube a 3/4ā€ compression plumbing connection can be achieved. Just connect the tube and tighten the nut.

To achieve a 1/2ā€ compression plumbing connection just select the 1/2ā€ tube stop adaptor and fit it into the male connection of the ball valve or the hot water outlet tting. Then fit the the 1/2ā€ tube support adaptor into the nut and slide the nut and the 1/2ā€ copper olive onto the copper tube. Just connect the tube and tighten the nut.